Kremlin Rexson-Airspray solutions

Kremlin Rexson Airspray Solutions

M22 A HPA 18 EN 2

The M22 A HPA is a suction fed gun with unsurpassed ergonomics designed for hard to atomize coatings. Fine air output adjustment at the handle.

 M22 HPA Suction New design and ergonomyReduced trigger effort: The gun is part of the operator’s arm who can focus on the application and the spraying movement for an improved quality

Unique aircap design: Unsurpassed finish quality with perfectly balanced fan.

Fine thread stuffing box: Fine control of the needle tightening torque for an improved sealing

Reduced number of components: Easy maintenance

M22 G HTI HVLP

The M22 G HTi is a gravity fed gun that delivers high finish quality and transfer efficiency with outstanding operator comfort. Available with one of 2 aircaps ; EP5 for hard to atomize coatings such as high solids and waterbornes or the E5 K HVLP for optimizing efficiency and HVLP compliant airspray..

This gun is availble with the following projectors dedicated to your own style of work:

  • 12 E5 K HVLP: Base coat application
  • 13 E5 K HVLP: Base coat & top coat application
  • 14 E5 K HVLP: Top coat application
  • 15 E5 K HVLP: Top coat & filler application

New design and ergonomyReduced trigger effort: The gun is part of the operator’s arm who can focus on the application and the spraying movement for an improved quality.

Product fluid passages in stainless steel: Compatible with water-based materials.

gun-M22G-HTI-45R_Modif Unique aircap design: Unsurpassed finish quality with perfectly balanced fan.

High transfer efficiency: Important product savings and environmental protection.

Fine thread stuffing box: Fine control of the needle tightening torque for an improved sealing.

E-Z adjust aircap: Allows adjustment without loosening the retaining ring.

Reduced number of components: Easy maintenance.

Choice of two 0.6 l cups available: Polyacetal white cup for water and solvent-based materialsPEHD grey cup for pre-catalysed or PU materials.

M22 P HPA 18 EN 3

Intended to be connected to a pump or a pot under pressure, this pressure gun is suitable for all large work for thick or fine paintings. It has a great versatility with its 1.8 mm nozzle. The M22 G HPA has an ergonomic design and great robustness.

 M22 HPA + Hoses for pressure pot New design and ergonomyReduced trigger effort: The gun is part of the operator’s arm who can focus on the application and the spraying movement for an improved quality

Product fluid passages in stainless steel: Compatible with water-based materials.

Unique aircap design: Unsurpassed finish quality with perfectly balanced fan.

Fine thread stuffing box: Fine control of the needle tightening torque for an improved sealing

Reduced number of components: Easy maintenance

The gun is ready to be connected to a pressure pot. It comes with 7.5m product and air hose.

Pressure pots

To feed, under pressure, all airspray guns. Conforms to the european legislation regarding the use of equipment under pressure (97/23/CE) (nitrile cover seal in standard).

Pressure Pot - 5 liters5 Liters Rilsan coated pressure pot.

 

Pressure Pot - 30 liters10 to 52 Liters Galanised pressure pots: available with agitator and removable stainless steel bucke.
Pressure Pot Stainless Steel - 15 and 30 liters10 to 52 Liters Stainless steel pressure pots: available with agitator and removable stainless steel bucke.

PMP 150 PRATiK pump:

The PMP-150 Pratik diaphragm pump is a floor mounted version and is designed for applications requiring a 1: 1 pressure ratio and can be used on some adhesive applications and harsh or high viscosity coatings.

Diaphragm Pump + M22 HPA Simple design: Easy operation and maintenance.

Double material diaphragm out of PFTE and nitrile: Compatible with most solvant or water-based matérials. Quick motor inversion.

Rugged design: Easy to carry.

Special Discount

 *Limited period offer.

Sign up and get 10% off every epochem chemical purchase

Scroll to Top